Home Page Contact Us My Basket Checkout
1-wire® Sensor & Control Modules
Description
Perfect companions for the 1-wire Weather Starter Kit, a range of additional weather sensors including rain, humidity, pressure etc. All simply connect to a 1-wire network via RJ11 cables. Compatible with the weather kit software, Maxim SDK and all major 1-wire software packages. See here for a description of the 1-wire concept >> See here for our range of 1-wire interfaces >>
Weather Related Humidity >> Baromoetric Pressure >> Rainfall >> Temperature >> Solar Radiation >> Lightning Detector >>	General Purpose Thermocouple >> Counter >> Switch/Relay >> 4-Ch Analogue Voltage Input >>
Product
TAI8540D Temperature/Humidity Module	0% to 100% RH range Measures Relative Humidity with a ±2% accuracy Temperature measurement accuracy ±2°C 1-Wire® DS2438 IC 1-wire in and 1-wire out RJ11 connectors All power supplied via 1-wire cable Unique 1-Wire address permits multiple sensors on the network TMEX -Standard compatible compatible with 1-wire weather starter kit software See third party software >> User Manual >>
TAI8570 Barometric Pressure Module	Pressure range 300-1100mbar 15 bit a/d converter. Temperature sensor included. No external power supply needed Calibration constants included in ROM memory. DS2406 1-Wire® based front end 1-wire in and 1-wire out RJ11 connectors All power supplied via 1-wire cable Unique 1-Wire address permits multiple sensors on the network TMEX -Standard compatible compatible with 1-wire weather starter kit software User Manual >>
TAI8575B 1-Wire Rain Gauge	Professional tipping bucket style rainfall sensor 11cm collection diameter Fully 1-Wire compatible via RJ11 connectors Li battery backup for the 1-Wire counter Measures 0.254mm (1/100th of an inch) per tip Dimensions - 13cm diameter x 18cm in height Unique 1-Wire address permits multiple sensors on the network TMEX -Standard compatible compatible with 1-wire weather starter kit software
TAI8520 Temperature Module	-50°C tp 55°C temperature range indoor use only ±0.5°C resolution 1-Wire® DS18B20 IC 1-wire in and 1-wire out RJ11 connectors All power supplied via 1-wire cable Unique 1-Wire address permits multiple sensors on the network TMEX -Standard compatible compatible with 1-wire weather starter kit software See third party software >> User Manual >>
S3-R1 Solar Radiation Detector	Solar Radiation detector measures sunlight peak detection at 860nm acceptance angle of 140 degrees. populated board - no casing RJ-11 and screw terminals uses DS2438 TMEX -Standard compatible NOT supported by the free weather software Maxim Application Note >>
LD3-R1 Lightning Detector	counts lightning strikes With a 60cm antenna typical 50 mile range populated board only 1-Wire® DS2423 IC RJ-11 and screw terminals TMEX -Standard compatible NOT supported by the free weather software Installation Instructions >>
TAI8560 Thermocouple Module	Connect a single thermocouple to a 1-wire network accepts type K, J, E, R, S and T thermocouples built-in cold junction compensation DS2760 based, 1-Wire compatible 12-bit ADC All power supplied via 1-wire cable Unique 1-Wire address permits multiple sensors on the network TMEX -Standard compatible compatible with 1-wire weather starter kit software User Manual >>
TAI8586 Counter Module	2 independant counter inputs opto-isolation battery back-up of count values DS2423 based, 1-Wire compatible All power supplied via 1-wire cable Unique 1-Wire address permits multiple sensors on the network TMEX -Standard compatible compatible with 1-wire weather starter kit software See third party software >> User Manual Available Soon
TAI8555 Switch/Relay Module	1 change-over relay contact 1A 30V DC, 125VAC resistive load no external PSU needed DS2406 based, 1-Wire compatible All power supplied via 1-wire cable Unique 1-Wire address permits multiple sensors on the network TMEX -Standard compatible compatible with 1-wire weather starter kit software User Manual >>
ADC-R1 4-Channel Analogue Input	4-channel of 16-bit Analogue input 0-24V input range Based on the DS2450 All I/O via screw terminals Dual RJ45 connectors (RJ11 Compatible) All power supplied via 1-wire cable Unique 1-Wire address permits multiple sensors on the network TMEX -Standard compatible Schematic >>
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757